VOLUNTARY RECALL NOTICE – WILD COUNTRY CLASSIC ROCKS AND ANODISED ROCKS – Issued 07/10/2013
For the safety of all of our customers Wild Country are issuing an immediate recall of certain batches of Wild Country Classic Rocks and Anodised Rocks.
If you own any Wild Country Classic Rocks and/or Anodised Rocks that were purchased any time from January 2010 onwards Wild Country would advise that you visit our website to check whether your product is from one of the affected batches.
You can go direct to our Rocks Recall page here http://bit.ly/GCt0sr
Martin Atkinson, Managing Director of Wild Country, outlined the reasons for the recall:
“Following a recent failure in use of a Classic Rock, in which fortunately no injury occurred, we conducted an in depth investigation and an extensive testing programme. Following the testing of over 17,000 Rocks we found some units that did not achieve their rated strength which varies, depending upon the size, from 4kN to 12kN. In a very small number of cases the failure load was below the units rated strength and in some cases below 7kN; a peak load that can be realistically achieved during a fall.”
Our first priority is always the safety of our climbing and mountaineering colleagues and customers, therefore we have taken the decision to recall the Rocks with the identified batch codes.
Wild Country apologise for the inconvenience this may cause, and thank you in advance for your cooperation in helping us to recover as many of the affected Rocks as possible.